Sat Dec 28 10:56:36 CST 2013 --- run started
====== lirc modules already loaded ==========
lirc_dev                9039  0 
====== lirc modules end =========

Serial device setup:  ttyS1
/sbin/modprobe lirc_serial io=0x2f8  irq=3 debug=1
====== dmesg output ============
[   10.667568] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[   10.667600] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.418621] NFS: Registering the id_resolver key type
[   12.418641] Key type id_resolver registered
[   12.418643] Key type id_legacy registered
[   12.789060] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   16.947182] NVRM: GPU at 0000:01:00: GPU-50bf7474-1fe0-699d-043c-1d5121696bff
[  158.686030] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned.
[  158.686498] lirc_serial: port existence test failed, cannot continue
[  158.686603] platform lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
======= dmesg end ===========
--connect=localhost:8761
Disable in kernel remote driver
Starting remotes from /usr/sbin/lircd -r -n -d /dev/remotes/serial_lirc --output /var/run/lirc/lircd
lircd: lircd(default) ready, using /var/run/lirc/lircd
lircd: accepted new client on /var/run/lirc/lircd
lircd: could not get file information for /dev/remotes/serial_lirc
lircd: default_init(): No such file or directory
lircd: WARNING: Failed to initialize hardware