Bug #902

Using a Seperate blaster and receiver doesn't always work

Added by jams over 11 years ago. Updated over 11 years ago.

Status:Closed Start date:01/31/2013
Priority:Normal Due date:
Assignee:jams % Done:

0%

Category:Other Spent time: 4.00 hours
Target version:8.0

Description

For a blaster to work it must be the first in the lirc chain.
Need to redo the remotes init script so that if the blaster is defined it's the first in the chain, and all others are linked into it.

Associated revisions

Revision 76eb853c
Added by jams over 11 years ago

linhes-udev-rules: add rules for mce,streamzap,serial lirc devices.

refs #902
refs #884

Revision dddb3574
Added by jams over 11 years ago

runit-scripts: fix logging for igdeamon, add support to remote init script so that the blaster is always the first device in the chain.
added support specificly for hd_pvr

refs #902
res #902

Revision 936db318
Added by jams over 11 years ago

linhes-udev-rules: added hdprv_lirc rule.
All of these lirc rules are limited to exactly one device. If more then one device is present then only the last device in init will get the symlink

refs #884
refs #902

Revision 62c9c3dd
Added by jams over 11 years ago

zilog-firmware: firmware for TX support of the hdpvr and pvr-150
In general I can't recommend anybody using these transmitters but including the firmware just in case someone really wants to

refs #902

Revision a16dcfb2
Added by jams over 11 years ago

LinHES-config, mythinstall: change case of hd_pvr and serial to all lower
refs #902

Revision 2648e999
Added by jams over 11 years ago

Merge branch 'testing'

  1. By James Meyer (1091) and others
  2. Via James Meyer (5) and others
    • testing: (1148 commits)
      LinHES-config: during install don't kill off lirc. This keeps the remote active all the way to the finish
      Change version numbers to 8.0 to match the release number. LinHES-conifg LinHES-system mythdb-initial runit-scripts supplemental-web
      LinHES-conifig: mv_install.py for the last partition don't go all the way to the end. Gotta leave room for gpt tables.
      xf86-video-ati: xorg ati driver.
      LinHES-config: timezip.py add syncing up of parental lvl passwords and starting level with MBE.
      LinHES-system: correct the logic for breaking out of the wmctrl loop. As written it would break out of the inner loop..but not the 60 iteration loop.
      e16_theme_settings: remove slide-in prop for new windows. For whatever reason this was preventing mplayer from being positioned correctly for appletrailers.
      LinHES-config, mythinstall: change case of hd_pvr and serial to all lower refs #902
      zilog-firmware: firmware for TX support of the hdpvr and pvr-150 In general I can't recommend anybody using these transmitters but including the firmware just in case someone really wants to
      linhes-udev-rules: added hdprv_lirc rule. All of these lirc rules are limited to exactly one device. If more then one device is present then only the last device in init will get the symlink
      runit-scripts: fix logging for igdeamon, add support to remote init script so that the blaster is always the first device in the chain. added support specificly for hd_pvr
      LinHES-system: add lh_system_restore and lh_system_backup. These scripts are called from the mythmenu. refs #900
      iguanair: rebuild with python 2.7
      LinHES-system: msg_daemon.py fix init and nasty bug related to timeout. In a nutshell timeout wouldn't work unless a msg without a timeout was called first.
      linhes-udev-rules: add rules for mce,streamzap,serial lirc devices.
      mythinstall: recompile for matching libs
      mythtv: latest .25-fixes and change mythbackup/restore call lh_system_$op to replace mythbackup/mythrestore. mythbackup no longer works correctly with the new windowmanager
      linhes-scripts: myth2mp3, myth2x264, myth2xvid: use mythutil to get cutlist
      LinHES-config, supplimental-web: Fix proxy numbering for Ceton infiniTV
      linhes-system: add additional stuff to the system backup and also introduced an exclude file. The exclude/include files are locate in /home/mythtv/backup_config/
      ...

History

Updated by jams over 11 years ago

  • Status changed from In Progress to Closed

Added udev rules and changed the logic of the runit script.
If a blaster is defined it will be set as the first in the chain, and the controlling lircd process.

Also available in: Atom PDF