Settings
Version 8 (brfransen, 05/16/2016 12:37 pm)
| 1 | 1 | h1. Settings |
|
|---|---|---|---|
| 2 | 1 | ||
| 3 | 1 | Many settings for your LinHES system can be accessed and changed in the Service Menu --> LinHES Configuration. |
|
| 4 | 1 | Settings for MythTV can be accessed and changed in the Service Menu --> MythTV Configuration. |
|
| 5 | 1 | ||
| 6 | 1 | h1. Other Settings |
|
| 7 | 1 | ||
| 8 | 4 | brfransen | h2. Install Boot Settings |
| 9 | 4 | brfransen | |
| 10 | 4 | brfransen | There are various [[Boot Settings]] available from the [[Downloads|LinHES install image.]] |
| 11 | 4 | brfransen | |
| 12 | 3 | brfransen | h2. MythVantage |
| 13 | 3 | brfransen | |
| 14 | 8 | brfransen | [[MythVantage]] provides the settings in Service Menu --> LinHES Configuration. |
| 15 | 3 | brfransen | To prevent MythVantage from erasing your custom settings, each module can be turned off. |
| 16 | 3 | brfransen | |
| 17 | 6 | brfransen | Change which settings are applied in Service Menu --> LinHES Configuration: |
| 18 | 3 | brfransen | * Edit @/etc/mythvantage.cfg@ |
| 19 | 6 | brfransen | ** *True* will allow the module to apply the settings |
| 20 | 6 | brfransen | ** *False* will prevent the module from applying the settings |
| 21 | 6 | brfransen | +NOTE:+ The UI will still run and the settings can be changed but will not be applied to your system. |
| 22 | 6 | brfransen | To prevent the settings from being changed use Service Menu --> LinHES Configuration --> Access Control |
| 23 | 3 | brfransen | ** *Modules:* |
| 24 | 3 | brfransen | *** misc = True |
| 25 | 3 | brfransen | *** sleep = True |
| 26 | 3 | brfransen | *** hostype = True |
| 27 | 3 | brfransen | *** advanced = True |
| 28 | 3 | brfransen | *** audio = True |
| 29 | 3 | brfransen | *** network = True |
| 30 | 3 | brfransen | *** xorg = True |
| 31 | 3 | brfransen | *** webuser = True |
| 32 | 3 | brfransen | *** restartfe = True |
| 33 | 3 | brfransen | *** reloadfe = True |
| 34 | 3 | brfransen | *** ddns = True |
| 35 | 3 | brfransen | *** screensaver = True |
| 36 | 3 | brfransen | *** ir = True |
| 37 | 3 | brfransen | *** user = True |
| 38 | 3 | brfransen | *** software = True |
| 39 | 3 | brfransen | *** smolt = True |
| 40 | 3 | brfransen | |
| 41 | 2 | brfransen | h2. osd_cat |
| 42 | 2 | brfransen | |
| 43 | 2 | brfransen | LinHES uses osd_cat to display various system messages (shortcut keys, updates, backup, restore, screenshooter, etc) on the screen. |
| 44 | 2 | brfransen | |
| 45 | 2 | brfransen | To change the default appearance settings of osd_cat: |
| 46 | 2 | brfransen | * Edit @/etc/osd_cat.cfg@ to make osd_cat use a different color, outline, shadow or font |
| 47 | 2 | brfransen | |
| 48 | 2 | brfransen | h2. unclutter |
| 49 | 2 | brfransen | |
| 50 | 2 | brfransen | LinHES uses unclutter to hide the pointer to make the system more like an appliance. Unclutter can be toggled on and off by pressing ctrl+alt u. |
| 51 | 2 | brfransen | |
| 52 | 2 | brfransen | To change the default settings of unclutter: |
| 53 | 2 | brfransen | * Edit @/etc/unclutter.cfg@ to make unclutter either more or less aggressive in hiding the pointer |
| 54 | 3 | brfransen | ** @idle@ is the number of seconds between polls for idleness |
| 55 | 3 | brfransen | ** @jitter@ is the amount of movement of the pointer that is to be ignored and considered as random noise |